Continuity Check (Open Circuit Check)

1. Disconnect the connectors at both ECU and sensor sides.
   Fig 1: Disconnecting Connectors At Both ECU And Sensor Sides

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Measure the resistance between the applicable terminals of the connectors.

   Resistance: 1 Ω. or less 

HINT:

Measure the resistance while lightly shaking the wire harness vertically and horizontally.

Fig 2: Measuring Resistance While Lightly Shaking Wire Harness Vertically And Horizontally

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002