Park/Neutral Position Switch

Check that engine can only be started with shift lever in the "N" or "P" positions, not in any other. If so, proceed to adjust Park/Neutral Position (PNP) switch.
Adjust PNP switch using the following steps:
1. Loosen bolt of PNP switch and set shift lever to "N" position.
2. Align the groove and neutral basic line. See Fig 1.
3. Hold switch in position and tighten 2 bolts to 10 ft. lbs. (13 N.m).
4. After adjustment, perform inspection as described in step 1.

Fig 1: Aligning PNP Switch Groove To Neutral Basic Line