Service Data
WARNING: This page is about a different car, the 2005 Lexus GS 300. However, it is still accessible from the selected car via links, so may be relevant.
Service Data Chart (Propeller Shaft)
| Shaft runout | Max. | 0.8 mm (0.031 in.) |
| Joint angle | No.2 joint | -1°01' ± 37' |
| No.3 joint | 1°14' ± 42' | |
| Center support bearing adjusting washer thickness | 1.0 mm (0.039 in.) | |
| 2.0 mm (0.079 in.) | ||
| 2.5 mm (0.098 in.) | ||
| 3.0 mm (0.118 in.) | ||
| 3.6 mm (0.142 in.) | ||
| 4.0 mm (0.157 in.) | ||
| 4.5 mm (0.177 in.) | ||