Torque Specifications

Part tightened	N.m	kgf.cm	ft.lbf
Starter
Starter wire clamp x Wire bracket	9.8	100	87 in.lbf
Starter wire x Starter assy	9.8	100	87 in.lbf
End cover x Brush holder	3.8	39	34 in.lbf
Starter housing x Magnetic switch	9.3	95	82 in.lbf
End cover with starter yoke x Starter housing	9.3	95	82 in.lbf
Lead wire of starter yoke x Terminal C	5.9	60	52 in.lbf
Starter assy x Cylinder block	39	400	29
Water by-pass pipe x Cylinder block	18	185	13
V-bank cover x V-bank cover bracket	5.0	51	44 in.lbf
Generator
Generator x Cylinder block	39	400	29
Generator x Grand cable	12	122	8.9
Bearing retainer x Drive end frame	2.3	24	20 in.lbf
Generator pulley x Rotor	111	1,132	82
Generator x Cord clip	5.9	60	52 in.lbf
Coil assy x Drive end frame	5.8	59	51 in.lbf
Brush holder assy x Coil assy	1.8	18	16 in.lbf
Rear end cover x Coil assy	4.6	47	41 in.lbf
V-bank cover x V-bank cover bracket	5.0	51	44 in.lbf