Window Down
WARNING: This page is about a different car, the 2003 Lexus RX 300 and 2002 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Sensor may be damaged if wiring harness is connected incorrectly.
- Connect the negative (-) lead from the ohmmeter to terminal No. 4 and the positive (+) lead to terminal No. 5. See CONNECTOR IDENTIFICATION .
- Connect the positive (+) lead from the battery to terminal No. 1 and the negative (-) lead to terminal No. 2.
- Check that the continuity exists when the window goes down.
- Check that no continuity exists when the window is in the fully opened position. If operation is not as specified, replace the motor. See WINDOW REGULATOR (FRONT DOOR) under REMOVAL & INSTALLATION.