Window Up
WARNING: This page is about a different car, the 2003 Lexus RX 300 and 2002 Lexus RX 300. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Sensor may be damaged if wiring harness is connected incorrectly.
- Connect the positive (+) lead from the ohmmeter to terminal No. 2 and the negative (-) lead to terminal No. 6. See CONNECTOR IDENTIFICATION .
- Connect the positive (+) lead from the battery to terminal No. 3 and the negative (-) lead to terminal No. 1.
- Check that the continuity exists when the window goes up.
- Check that no continuity exists when the window is in the fully closed position. If operation is not as specified, replace the motor. See WINDOW REGULATOR (REAR DOOR) under REMOVAL & INSTALLATION.