Multiplex Tilt & Telescopic Ecu: Replacement

HINT:

COMPONENTS: SEE COMPONENTS 

1. PRECAUTION (SEE  AIR BAG SAFETY PRECAUTIONS  ) 
2. SEPARATE BATTERY NEGATIVE TERMINAL (SEE  AIR BAG SAFETY PRECAUTIONS  ) 
3. REMOVE INSTRUMENT CLUSTER FINISH PANEL CENTER LOWER (SEE  REPLACEMENT  ) 
4. REMOVE INSTRUMENT CLUSTER FINISH PANEL END (SEE  REPLACEMENT  ) 
5. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSY NO.1 (SEE  REPLACEMENT  ) 
6. REMOVE COIN BOX ASSY (SEE  REPLACEMENT  ) 
7. REMOVE OUTER MIRROR SWITCH ASSY (SEE  REPLACEMENT  ) 
8. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSY NO.1 (SEE  REPLACEMENT  ) 
9. REMOVE INSTRUMENT PANEL AIR BAG ASSY LOWER NO.1 (SEE  SPIRAL CABLE  ) 
10. REMOVE MULTIPLEX TILT & TELESCOPIC ECU 
    1. Disconnect the connectors.
    2. Remove the 2 nuts and the multiplex tilt & telescopic ECU.
11. INSTALL MULTIPLEX TILT & TELESCOPIC ECU 
    1. Install the multiplex tilt & telescopic ECU with the 2 nuts.
    2. Connect the connectors.
12. INSTALL INSTRUMENT PANEL AIR BAG ASSY LOWER NO.1 (SEE  SPIRAL CABLE  ) 
13. CONNECT BATTERY NEGATIVE TERMINAL 
14. INSPECT SRS WARNING LIGHT (SEE  AIR BAG WARNING LIGHT DOES NOT ILLUMINATE  ) 
15. PERFORM INITIALIZATION (SEE  INITIALIZATION  )