Idle Speed: Inspection
- INITIAL CONDITIONS
- Engine is at normal operating temperature
- Air cleaner is installed
- All pipes and hoses of air induction systems are connected
- All accessories are switched OFF
- All vacuum lines are properly connected
HINT:
All vacuum hoses should be properly connected.
- SFI system wiring connectors are fully plugged
- Ignition timing is set correctly
- Transmission is in neutral position
- Air conditioning switches are OFF
- CONNECT LEXUS HAND-HELD TESTER OR OBD II SCAN TOOL (See IGNITION TIMING )
- INSPECT IDLE SPEED
- Race the engine speed at 2,500 rpm for approx. 90 seconds.
- Check the idle speed.
- Idle speed: 700 +/- 50 rpm
If the idle speed is not as specified, check the air intake system.
- DISCONNECT LEXUS HAND-HELD TESTER OR OBD II SCAN TOOL