Generator Specifications
GENERATOR SPECIFICATIONS
| Application | Specification | ||||
|---|---|---|---|---|---|
| Brush Length | |||||
| Standard | .413 in. (10.5 mm) | ||||
| Limit (Minimum) | More Than .177 in. (4.5 mm) | ||||
| Rotor | |||||
| Resistance (1) | |||||
| 100-Amp | 2.3-2.7 Ohms | ||||
| 130-Amp | 1.5-1.9 Ohms | ||||
| Slip Ring Diameter | |||||
| Standard | .559-.567 in. (14.2-14.4 mm) | ||||
| Minimum | .551 in. (14.0 mm) | ||||
| Generator Regulated Output | |||||
| Amperage | |||||
| Without Load | 10 Or Less Amps | ||||
| With Load | 30 Or More Amps | ||||
| Voltage (1) | 13.2-14.8 Volts | ||||
|
|||||