ECM (3MZ-FE): Replacement

REMOVE FRONT DOOR SCUFF PLATE RH
REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSY NO.2
REMOVE GLOVE COMPARTMENT DOOR ASSY
REMOVE ECM
1. Remove the 2 wire harness clamps.
2. Disconnect the 5 ECM connectors.
3. Remove the 2 nuts, and then remove the ECM.
  
  Fig 1: Locating ECM Removing Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the 2 screws, and then remove the wire harness clamp bracket.
  
  Fig 2: Locating Wire Harness Clamp Bracket Removing Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE ECM BRACKET
1. Remove the 2 screws, and then remove the ECM bracket.
  
  Fig 3: Locating ECM Bracket Removing Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE ECM BRACKET NO.2
1. Remove the 2 screws, and then remove the ECM bracket.
  
  Fig 4: Locating ECM Bracket No.2 Removing Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ECM BRACKET NO.2
INSTALL ECM BRACKET
INSTALL ECM
Torque: 5.5 N.m (56 kgf.cm, 49 in.lbf)
INSTALL GLOVE COMPARTMENT DOOR ASSY
INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSY NO.2
INSTALL FRONT DOOR SCUFF PLATE RH