LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2004 >> RX 330 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 542 (Audio/Visual) >> Stereo Component Amplifier >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Stereo Component Amplifier: Installation

WARNING: This page is about a different car, the 2007 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL STEREO COMPONENT AMPLIFIER (w/ Front Center Speaker) 
    1. Install the No. 2 amplifier bracket with the 2 bolts.
      Fig 1: Identifying No. 2 Amplifier Bracket & Bolts
      G05270678Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the No. 3 amplifier bracket with the 2 bolts.
      Fig 2: Identifying No. 3 Amplifier Bracket & Bolts
      G05270677Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect each connector.
    4. Install the stereo component amplifier with the 2 bolts and the nut.
      Fig 3: Identifying Stereo Component Amplifier Bolts & Nut (W/ Front Center Speaker)
      G05270676Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL STEREO COMPONENT AMPLIFIER (w/o Front Center Speaker) 
    1. Connect each connector.
    2. Install the stereo component amplifier with the 2 bolts and the nut.
      Fig 4: Identifying Stereo Component Amplifier Bolts & Nut (W/O Front Center Speaker)
      G05270682Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL REAR SEAT SUB FLOOR PANEL ASSEMBLY 
    1. Install the 3 bolts.
      Fig 5: Identifying Rear Seat Sub Floor Panel Assembly Bolts
      G05270674Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the rear seat sub floor panel assembly with the 3 nuts.
      Fig 6: Identifying Rear Seat Sub Floor Panel Assembly Nuts
      G05270673Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL SIDE DECK TRIM PANEL ASSEMBLY LH 
  5. INSTALL SIDE DECK TRIM PANEL ASSEMBLY RH 
  6. INSTALL ROPE HOOK 
  7. INSTALL REAR SEAT SIDE COVER LH 
  8. INSTALL REAR DOOR SCUFF PLATE LH 
  9. INSTALL REAR SEAT SIDE COVER RH 
  10. INSTALL REAR DOOR SCUFF PLATE RH 
  11. INSTALL SIDE DECK TRIM COVER LH 
  12. INSTALL SIDE DECK TRIM COVER RH 
  13. INSTALL REAR FLOOR FINISH SIDE PLATE LH 
  14. INSTALL REAR FLOOR FINISH SIDE PLATE RH 
  15. INSTALL SIDE DECK TRIM BOX RH 
  16. INSTALL SIDE DECK TRIM BOX LH 
  17. INSTALL REAR FLOOR FINISH PLATE 
  18. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY 
  19. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY 
  20. INSTALL REAR DECK FLOOR BOX 
  21. INSTALL FRONT DECK FLOOR BOX 
  22. INSTALL JACK CARRIER ASSEMBLY 
  23. INSTALL JACK ASSEMBLY 
  24. INSTALL JACK CARRIER SUPPORT 
  25. INSTALL DECK BOARD SUB-ASSEMBLY 
  26. INSTALL TONNEAU COVER ASSEMBLY 
  27. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  28. PERFORM INITIALIZATION 
    NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal (See INITIALIZATION ).
scientia non olet · About LEMON Manuals