Service Data
WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
SERVICE DATA SPECIFICATION
| Front speed sensor | LH | S2-2 (FL+) - S2-1 (FL-) | 0.6 to 2.5 kΩ | |
| S2-2 (FL+) - Body ground | 10 kΩ or higher | |||
| S2-1 (FL-) - Body ground | 10 kΩ or higher | |||
| RH | S3-2 (FR+) - S3-1 (FR-) | 0.6 to 2.5 kΩ | ||
| S3-2 (FR+) - Body ground | 10 kΩ or higher | |||
| S3-1 (FR-) - Body ground | 10 kΩ or higher | |||
| Rear speed sensor | for 2WD | LH | (S25-1) - (S25-2) | 0.9 to 2.1 Ω |
| (S25-1) - Body ground | 10 kΩ or higher | |||
| (S25-2) - Body ground | 10 kΩ or higher | |||
| RH | (S26-1) - (S26-2) | 0.9 to 2.1 Ω | ||
| (S26-1)-Body ground | 10 kΩ or higher | |||
| (S26-2) - Body ground | 10 kΩ or higher | |||
| for 4WD | LH | S25-1 (RL+) - S25-2 (RL-) | 0.9 to 1.3 Ω | |
| S25-1 (RL+) - Body ground | 1 MΩ or higher | |||
| S25-2 (RL-) - Body ground | 1 MΩ or higher | |||
| RH | S26-1 (RR+) - S26-2 (RR-) | 0.9 to 1.3 Ω | ||
| S26-1 (RR+) - Body ground | 1 MΩ or higher | |||
| S26-2 (RR-) - Body ground | 1 MΩ or higher | |||
| VSC Off Switch | Switch is pushed in | 2 - 1 | Below 1 Ω | |
| Switch is not pushed in | 2 - 1 | 10 kΩ or higher | ||