Steering Pad Switch Modulator: Replacement

HINT:

COMPONENTS: See COMPONENTS 

1. REMOVE SWITCH & VOLUME CASE 
   1. Apply protective tape to the steering wheel boss cover lower as shown in Fig 1 .
   2. Using a screwdriver, disengage the 3 claws and remove the switch & volume case.

   HINT:

   Tape the screwdriver tip before use.

   Fig 1: Disengaging Claws & Removing Switch & Volume Case Using Screwdriver

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. REMOVE STEERING PAD SWITCH MODULATOR 
   1. Remove the 2 screws.
   2. Remove the steering pad switch modulator then disconnect the connector.
      Fig 2: Removing Screws & Steering Pad Switch Modulator

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002