Inspection Procedure
WARNING: This page is about a different car, the 2004 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
- DISPLAY CHECK MODE (TOUCH SWITCH CHECK)
- Perform display touch switch check of display check mode.
- Start up the diagnosis system and perform display touch switch check of display check mode.
Standard: Touch switch is normal
- Start up the diagnosis system and perform display touch switch check of display check mode.
- NG: REPLACE RADIO RECEIVER ASSY (See REPLACEMENT )
- OK: Go to next step.
- Perform display touch switch check of display check mode.
- CHECK SWITCH (BEEP SOUND)
- Check the switch (Beep sound).
- Press each touch switch on the navigation screen to check that the beep sounds are produced.
Standard: Beep sound is normal
- Press each touch switch on the navigation screen to check that the beep sounds are produced.
- NG: REPLACE NAVIGATION ECU ASSY (See REPLACEMENT )
- OK: SYSTEM OK
- Check the switch (Beep sound).