Inspection Procedure

Check if the BLUETOOTH settings are correct.

OK: 

1. BLUETOOTH settings are correct. 

1. NG: Set settings correctly. 
2. OK: Go To Next Step. 

Check if the cellular phone is BLUETOOTH capable.

HINT:

Some versions of BLUETOOTH capable cellular phone may not be compatible.

OK: 

1. The phone is BLUETOOTH capable. 

1. NG: END (Only a bluetooth capable cellular phone can be used) 
2. OK: Go To Next Step. 

Check if the cellular phone functions.

HINT:

• The cellular phone is unable to call under any of the following conditions.
• The cellular phone is locked.
• The directory is being transferred.
• The line is crossed.
• Transmission is requested.
• The power is off.
• The cellular phone is not connected to BLUETOOTH ("BT" is displayed while a connection is present).

OK: 

1. None of the above conditions exist. 

1. NG: Set setting correctly. 
2. OK: Go To Next Step. 

Check if the cellular phone can call.

HINT:

When the battery charge is low, calls cannot be made or received.

OK: 

1. The cellular phone can call. 

1. NG: Replace cellular phone. 
2. OK: Go To Next Step. 

1. Put a cellular phone into a receiving state.
2. Place the cellular phone close to the multi-display.
3. Check if the cellular phone has reception according to the multi-display.

OK: 

1. The cellular phone has reception. 

1. NG: Replace multi-display. 
2. OK: Go to "Own voice cannot be heard, quiet or distorted" (See  36. OWN VOICE CANNOT BE HEARD, QUIET OR DISTORTED   )