Front Stabilizer Bar: Installation

HINT:

• Install the bushing to the stabilizer bar so that the cutout of the bushing faces the front of the vehicle, as shown in the illustration.
Fig 1: Installing Bushing To Stabilizer Bar So Cutout Of Bushing Faces Front Of Vehicle
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
• Install the bushing to the outside of the paint line on the stabilizer bar.

Install the stabilizer bar to the body with the 4 bolts.

1. Torque: 23 N.m (235 kgf.cm, 17 ft.lbf) 

1. Torque: 
2. Nut A: 74 N.m (755 kgf.cm, 55 ft.lbf) 
3. Nut B: 95 N.m (970 kgf.cm, 70 ft.lbf) 

HINT:

If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.

Fig 2: Installing RH And LH Stabilizer Bar Links

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002