Toe Control Link: Removal

Remove the bolt and disconnect the ABS speed sensor wire harness.

1. Remove the nut.
2. Using SST, disconnect the toe control link from the axle carrier.
   1. SST 09610-20012
   Fig 1: Using SST To Disconnect Toe Control Link From Axle Carrier

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Place matchmarks on the cam plate and rear suspension member.
Fig 2: Placing Matchmarks On Cam Plate And Rear Suspension Member
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the nut, cam plate, cam bolt, toe control link piece and toe control link from the axle carrier.