April 5, 2026: LEMON Manuals is launched! Read the announcement.

Problem Symptoms Table

Troubleshoot the circuits for the applicable problem symptom in the order given in the chart below. Proceed to the page for each circuit.

HINT:

If the instruction "Proceed to next circuit inspection shown on problem symptoms table" is given in the flow chart for each circuit, proceed to the circuit with the next highest number in the table to continue the check.
If the trouble still reappears even though there are no abnormalities in any of the other circuits, then check and replace the Power Seat Control ECU as the last step.

PROBLEM SYMPTOMS TABLE - POWER SEAT CONTROL SYSTEM

Symptom	Suspected Area
All the motors do not function when operating manually.	There is an object that blocks the inflared signal under the seat. Dirt on the signal reception part and emission part in the power seat control ECU or in the driver's seat control switch. ECU power source circuit +B power source circuit Power seat control switch circuit Power seat control ECU and Driver's seat control switch
All the motors do not function by manual operation (except for slide operation).	There is an object that blocks the inflared signal under the seat. Affected by the parts installed later (ornamental neon tube). Dirt on the signal reception part and emission part in the power seat control ECU or in the driver's seat control switch. Power seat control ECU and Driver's seat control switch
One function do not operate by manual operation only.	Motor circuit Power seat control ECU
The movement is intermittent (all the motors) when operating manually.	ECU power source circuit +B power source circuit Power seat control switch circuit Power seat control ECU and Driver's seat control switch
The movement is intermittent (all the motors except for slide operation) when operating manually.	Affected by the parts installed later (remote controller using infrared light). Power seat control ECU and Driver's seat control switch
The movement is intermittent (a pert of motors) when operating manually.	Position sensor power source circuit Position sensor circuit Motor circuit Power seat control ECU and Driver's seat control switch
The movement is different from the switch operation when operating manually.	There is an object that blocks the inflared signal under the seat. Dirt on the signal reception part and emission part in the power seat control ECU or in the driver's seat control switch. Power seat control ECU and Driver's seat control switch
Motors move without any switch operation.	Driver's seat control switch 2. Power seat control ECU
The motors do not stop during manual operation.	There is an object that blocks the inflared signal under the seat. Switch nob Driver's seat control switch Power seat control ECU
Return function does not operate or operates a little, then stops (ALL return functions).	ECU power source circuit +B power source circuit Ignition switch circuit Position sensor power source circuit Position sensor circuit Memory switch circuit Power seat control ECU Body ECU (Main)