DTC 01-DD, 01-E1: Master Reset; Voice Processing Device ON Error: Description
WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
DTC DETECTION CONDITION TABLE
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| 01-DD *1 |
The device that should be the master has been disconnected after the engine starts. |
|
| 01-E1 *2 |
The AMP device records that the AMP output does not function even while the source device is operating. | |
| HINT: *1: This code may be stored if the engine is started and the ignition switch is turned to the START position again. *2: Even if no fault is present, this trouble code may be stored depending on the battery condition or engine start voltage. |
||
NOTE:
- Before starting troubleshooting, be sure to clear DTCs to erase codes stored due to the reasons described in the HINT above. Then, check for DTCs and troubleshoot according to the output DTCs.
- The multi-display is the master unit.
- Be sure to clear and recheck DTCs after the inspection is completed to confirm that no DTCs are output.