Yaw Rate And Acceleration Sensor: Installation

WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL YAWRATE SENSOR
1. Install the yawrate sensor with the 2 bolts.
  Torque: 14 N*m (143 kgf*cm, 10 ft.*lbf)
2. Connect the connector.
  
  Fig 1: Locating Yawrate Sensor With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL YAWRATE SENSOR PROTECTOR
1. Install the sensor protector with the bolt.
INSTALL CENTER PILLAR GARNISH LOWER RH
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH
INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
INSTALL REAR DOOR SCUFF PLATE RH
INSTALL FRONT DOOR SCUFF PLATE RH
INSTALL FRONT SEAT ASSEMBLY RH
HINT:

See INSTALLATION
PERFORM YAW RATE SENSOR ZERO POINT CALIBRATION
HINT:

See CALIBRATION