Navigation Check Mode

HINT:

• This mode displays GPS satellite information.
• Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be shown the same as on the actual vehicle.

1. ENTER DIAGNOSTIC MODE (See  DTC CHECK/CLEAR   ) 
2. NAVIGATION CHECK 
   Fig 1: Identifying Tester Display - Navigation Check

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   1. Select "Navigation Check" from the "Diagnosis MENU" screen.
3. GPS INFORMATION 
   1. Select "GPS Information" from the "Navigation Check" screen.
      Fig 2: Identifying Tester Display - GPS Information (1 Of 2)

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. When GPS information is displayed, check the GPS conditions.

      HINT:

      • This screen is updated once per second when input signals to the vehicle are changed.
      • For details of this function, refer to DIAGNOSIS DISPLAY DETAILED DESCRIPTION . .
      Fig 3: Identifying Tester Display - GPS Information (2 Of 2)

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. VEHICLE SENSORS 
   1. Select "Vehicle Sensors" from the "Navigation Check" screen.
      Fig 4: Identifying Tester Display - Vehicle Sensors (1 Of 2)

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Check all the signals and sensors when vehicle signal information is displayed.

      HINT:

      • This screen is updated once per second when input signals to the vehicle are changed.
      • This screen displays vehicle signals input to the navigation ECU.
      • For details of this function, refer to DIAGNOSIS DISPLAY DETAILED DESCRIPTION .
      Fig 5: Identifying Tester Display - Vehicle Sensors (2 Of 2)

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. COLOR BAR CHECK 
   Fig 6: Identifying Tester Display - Color Bar Check

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   1. Select "Color Bar Check" from the "Navigation Check" screen.
   Fig 7: Identifying Tester Display - NAVI Color Bar Check
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Check each color of the color bar when the "NAVI Color Bar Check" screen is displayed.

      HINT:

      • Colors will not be displayed full-screen as in "Display Check Mode".
      • This screen displays the navigation ECU display color.
6. MEMORY COPY/PASTE CHECK 
   Fig 8: Identifying Tester Display - Memory Copy/Paste

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   HINT:

   This function cannot be used.

7. PARTS INFORMATION 
   1. Select "Parts Information" from the "Navigation Check" screen.
      Fig 9: Identifying Tester Display - Parts Information (1 Of 2)

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Check the navigation and disc information when the "Parts Information" screen is displayed.
      Fig 10: Identifying Tester Display - Parts Information (2 Of 2)

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Screen description: 

   PARTS INFORMATION DISPLAY TABLE
   
   

   Display	Contents
   Navigation Manufacturer/*1	Navigation ECU manufacturer is displayed.
   Navigation Version/*2	Navigation ECU version is displayed.
   Disc Manufacturer/*3	Map disc manufacturer is displayed.
   Disc Version/*4	Map disc version is displayed.

8. MIC & VOICE RECOGNITION CHECK 
   Fig 11: Identifying Tester Display - Navigation Check

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   1. Select "Mic & Voice Recognition Check" on the "Navigation Check" screen to display "MICROPHONE & VOICE RECOGNITION CHECK" screen.
   2. When a voice is input into the microphone, check that the microphone input level meter changes according to the input voice.
   Fig 12: Identifying Tester Display - Microphone & Voice Recognition Check
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   3. Push the recording switch and perform voice recording.
   4. Check that the recording indicator remains on while recording and that the recorded voice is played normally.

      HINT:

      • For details of this function, refer to DIAGNOSIS DISPLAY DETAILED DESCRIPTION .
      • This function is controlled by the navigation ECU.
9. DVD PLAYER INFORMATION CHECK 
   Fig 13: Identifying Tester Display - DVD Player Information (1 Of 2)

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   1. Select "DVD Player Information" from the "Navigation Check" screen.
   2. Check for DTCs.

      HINT:

      Fig 14: Identifying Tester Display - DVD Player Information (2 Of 2)
      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      • This is a DVD player check function in the navigation ECU.
      • For details of this function, refer to DIAGNOSIS DISPLAY DETAILED DESCRIPTION .