Cellular Phone cannot Send / Receive

1. Check if the BLUETOOTH settings are correct.

   OK : BLUETOOTH settings are correct. 

NG : SET SETTINGS CORRECTLY 

OK : GO TO NEXT STEP 

1. Check if the cellular phone is BLUETOOTH capable.

   HINT:

   Some versions of BLUETOOTH capable cellular phones may not be compatible.

   OK : Phone is BLUETOOTH capable. 

NG : END (ONLY A BLUETOOTH CAPABLE CELLULAR PHONE CAN BE USED) 

OK : GO TO NEXT STEP 

1. Check if the cellular phone functions.

   HINT:

   The cellular phone is unable to make a call under any of the following conditions:

   • The cellular phone is locked.
   • The directory is being transferred.
   • The line is crossed.
   • Transmission is regulated.
   • The power is off.
   • The cellular phone is not connected to BLUETOOTH ("BT" is displayed while connected).

     OK : Cellular phone functions normally. 

NG : CHECK AND REPLACE CELLULAR PHONE 

OK : GO TO NEXT STEP 

1. Check if the cellular phone can make a call.

   HINT:

   When the battery power is low, calls cannot be made or received.

   OK : Cellular phone can make a call. 

NG : REPLACE CELLULAR PHONE 

OK : GO TO NEXT STEP 

1. Set the cellular phone so that it can receive calls.
2. Place the cellular phone close to the multi-display.
3. Check if the cellular phone has reception according to the multi-display.

   OK : Cellular phone has reception. 

NG : REPLACE MULTI-DISPLAY 

OK : PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN  PROBLEM SYMPTOMS TABLE