LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2006 >> IS 250 AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (4GR-FSE) - DTC P0604 - P2A03, DTC U0101 >> DTC P0630: VIN not Programmed or Mismatch - ECM / PCM >> Component Operating Range
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Operating Range

COMPONENT OPERATING RANGE CHART

VIN code Programmed
  1. READ CURRENT DTC 
    1. Connect the intelligent tester to the DLC3.
    2. Turn the engine switch on (IG) and turn the tester on.
    3. Enter the following menus: DIAGNOSIS / ENHANCED OBD II / DTC INFO / CURRENT CODES.
    4. Read DTCs.

    Result 

    RESULT CHART

    Display (DTC Output) Proceed to
    Only P0630 A
    P0630 and other DTCs B

    If any DTCs other than P0630 are output, troubleshoot those DTCs first.

    NOTE: If P0630 is set, the VIN must be input to the ECM using the intelligent tester. However, all DTCs are cleared automatically by the tester when inputting the VIN. If DTCs other than P0630 are set, check them first.

    B : GO TO DTC CHART 

    A : Go To Next Step 

  2. INPUT VIN WITH INTELLIGENT TESTER 

    NEXT : END 

scientia non olet · About LEMON Manuals