Shift Lever Assembly: Reassembly

WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL SHIFT LOCK CONTROL ECU SUBASSEMBLY
1. Install the shift lock control ECU sub-assembly with the 2 screws.
  
  Fig 1: Identifying Shift Lock Control ECU Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL TRANSMISSION CONTROL SWITCH
1. Install the shift lever with the pin and shift lever nut.
  
  Fig 2: Identifying Shift Lever With Pin And Shift Lever Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Apply MP grease to the hatched area of the shift lever guide housing as indicated in the illustration.
  
  Fig 3: Applying MP Grease To Hatched Area Of Shift Lever Guide Housing
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the transmission control switch to the shift lever guide housing.
  NOTE: Securely engage the claws.
  
  Fig 4: Identifying Transmission Control Switch And Shift Lever Guide Housing
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install the shift lever guide housing with the shift lever lock pin and a new shift lever support.
  NOTE:
  - Install the shift lever nut and lock pin after first engaging the 2 claws.
    
    Fig 5: Identifying Shift Lever Guide Housing With Shift Lever Lock Pin
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  - Securely engage the claws.
5. Connect the transmission control switch connector to the floor shift assembly.
  
  Fig 6: Identifying Transmission Control Switch Connector And Floor Shift Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SHIFT POSITION INDICATOR
1. Install the shift position indicator to the console panel upper with the 4 screws.
  
  Fig 7: Identifying Shift Position Indicator And Console Panel Upper
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002