LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2006 >> IS 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Control System (2GR-FSE)) >> SFI System >> DTC P0171 System Too Lean (Bank 1); DTC P0172 System Too Rich (Bank 1); DTC P0174 System Too Lean (Bank 2); DTC P0175 System Too Rich (Bank 2) >> Typical Enabling Conditions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Typical Enabling Conditions

WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL ENABLING CONDITIONS

Monitor runs whenever following DTCs are not present P0010, P0020 (VVT OCV Bank 1, 2)
P0011 (VVT System 1 - Advance)
P0012 (VVT System 1 - Retard)
P0021 (VVT System 2 - Advance)
P0022 (VVT System 2 - Retard)
P0031, P0032, P0051, P0052 (A/F sensor heater - Sensor 1)
P0100 - P0103 (MAF meter)
P0115 - P0118 (ECT sensor)
P0120 - P0223
P2135 (TP sensor)
P0125 (Insufficient ECT for Closed Loop)
P0335 (CKP sensor) P0340, P0341 (CMP sensor)
P0500 (VSS)
Fuel system status Closed loop
Battery voltage 11 V or more
Either of following conditions 1 or 2 is met: -
1. Engine RPM Less than 1,100 rpm
2. Intake air amount per revolution 0.29 g/rev or more
Catalyst monitor Not executed
scientia non olet · About LEMON Manuals