VVT Sensor: Installation

WARNING: This page is about a different car, the 2006 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL VVT SENSOR (for Exhaust Side of Bank 2)
1. Install the VVT sensor with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
2. Connect the VVT sensor connector.
  
  Fig 1: Identifying VVT Sensor (For Exhaust Side Of Bank 2)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL VVT SENSOR (for Intake Side of Bank 2)
1. Install the VVT sensor with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
2. Connect the VVT sensor connector.
  
  Fig 2: Identifying VVT Sensor (For Intake Side Of Bank 2)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL VVT SENSOR (for Exhaust Side of Bank 1)
1. Install the VVT sensor with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
2. Connect the VVT sensor connector.
  
  Fig 3: Identifying VVT Sensor (For Exhaust Side Of Bank 1)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL VVT SENSOR (for Intake Side of Bank 1)
1. Install the VVT sensor with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
2. Connect the VVT sensor connector.
INSTALL V-BANK COVER SUB-ASSEMBLY (See INSTALLATION )

Fig 4: Identifying VVT Sensor (For Intake Side Of Bank 1)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002