LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2006 >> IS 350 >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (2GR-FSE) >> Integration Relay >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Integration Relay: Installation

  1. INSTALL INTEGRATION RELAY 
    1. Connect the 3 connectors.
    2. Attach the integration relay to the engine room No. 2 relay block.
    3. Install the No. 2 relay block cover.
  2. REMOVE ENGINE ROOM SIDE COVER LH (See  REMOVAL  ) 
  3. REMOVE COOL AIR INTAKE DUCT SEAL (See  REMOVAL  ) 
    Fig 1: Identifying Integration Relay
    G04054984Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals