Inspection Procedure

WARNING: This page is about a different car, the 2006 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.

CHECK BLUETOOTH SETTINGS
1. Check if the Bluetooth settings are correct.
  OK:
  
  Bluetooth settings are correct.
NG: SET SETTINGS CORRECTLY

OK: GO TO NEXT STEP.
CHECK CELLULAR PHONE
1. Check if the cellular phone is Bluetooth compatible.
  HINT:
  
  Some versions of Bluetooth compatible cellular phones may not function.
  
  OK:
  
  Phone is Bluetooth compatible.
NG: END (ONLY A BLUETOOTH COMPATIBLE CELLULAR PHONE CAN BE USED)

OK: GO TO NEXT STEP.
CHECK SETTINGS
1. Check if the cellular phone functions.
  HINT:
  
  The cellular phone is unable to call under any of the following conditions.
  - The cellular phone is locked.
  - The directory is being transferred.
  - The line is crossed.
  - Transmission is regulated.
  - The power is off.
  - The cellular phone is not connected to Bluetooth ("BT" is displayed while a connection is established).
    OK:
    
    None of the above conditions exist.
NG: SET CORRECTLY

OK: GO TO NEXT STEP.
CHECK CELLULAR PHONE
1. Check if the cellular phone can make a call.
  HINT:
  
  When the battery is low, calls cannot be made or received.
  
  OK:
  
  Cellular phone can make a call.
NG: REPAIR OR REPLACE CELLULAR PHONE

OK: GO TO NEXT STEP.
CHECK RECEPTION
1. Set the cellular phone so that it can receive calls.
2. Place the cellular phone close to the radio and navigation assembly.
3. Check if the cellular phone has reception according to the radio and navigation assembly.
  OK:
  
  Cellular phone has reception.
NG: REPLACE RADIO AND NAVIGATION ASSEMBLY

OK: RETURN TO THE ORIGINAL INSPECTION BECAUSE THE CHECK RESULT IS NORMAL