How To Proceed With Troubleshooting

WARNING: This page is about a different car, the 2006 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Troubleshoot in accordance with the procedures on the following references.

VEHICLE BROUGHT TO WORKSHOP
PROBLEM SYMPTOM CONFIRMATION
1. If the symptom does not occur, proceed to A.
2. If the symptom occurs, proceed to B.
A: SYMPTOM SIMULATION

B: Go to Next Step
See PROBLEM SYMPTOMS TABLE
INSPECTION (See PRE-CHECK )
IDENTIFICATION OF PROBLEM
REPAIR OR REPLACE
CONFIRMATION TEST
Before troubleshooting:
1. Using the tester, check the battery voltage.
  Standard Voltage: 10 to 14 V
2. Perform a visual check for blown fuses and poor connections in connectors.