How To Proceed With Troubleshooting
WARNING: This page is about a different car, the 2006 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
HINT:
Troubleshoot in accordance with the procedures on the following references.
- VEHICLE BROUGHT TO WORKSHOP
- CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK (See CUSTOMER PROBLEM ANALYSIS CHECK )
- See PROBLEM SYMPTOMS TABLE
- PERFORM TROUBLESHOOTING
- See PRE-CHECK
- Circuit inspection (See CIRCUIT DESCRIPTION - CIRCUIT DESCRIPTION )
- ADJUST, REPAIR OR REPLACE
- RESET POWER WINDOW MOTOR
- If any of the power window switch illuminations is blinking after repair, reset the power window.
- Turn the ignition switch ON.
- Open the driver side door glass.
- Fully pull up the AUTO switch of the power window master switch until the door glass is fully closed.
- Check that the AUTO UP/DOWN function operates normally.
- If any of the power window switch illuminations is blinking after repair, reset the power window.