Cruise Control Main Switch: Installation

INSTALL CRUISE CONTROL MAIN SWITCH
1. Install the cruise control main switch with the 2 screws.
  Torque: 2.4 N*m (25 kgf*cm, 21 in.*lbf)
2. Connect the connector.
INSTALL STEERING PAD (See REMOVAL )
INSTALL STEERING WHEEL NO.3 COVER LOWER (See INSTALLATION )
INSTALL STEERING WHEEL NO.2 COVER LOWER (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
INSPECT STEERING PAD (See STEERING PAD )

Fig 1: Identifying Cruise Control Main Switch With Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
PERFORM INITIALIZATION
NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal. (See INITIALIZATION )
INSPECT SRS WARNING LIGHT
(See DIAGNOSIS SYSTEM )