Torque Specifications

WARNING: This page is about a different car, the 2006 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

SUSPENSION CONTROL TORQUE SPECIFICATIONS

Part Tightened	N*m	kgf*cm	ft.*lbf
Active height control pump motor	-
AHC fluid line	15	155	11
AHC pump motor bracket x Body	18	185	13
AHC pump motor bracket x AHC pump motor assembly	5.5	55	48 in.*lbf
Cushion bolt	6.9	70	61 in.*lbf
Bracket x AHC pump motor assembly	5.5	55	48 in.*lbf
Reservoir x Housing	6.9	70	61 in.*lbf
Reservoir bracket x Housing	12	120	8
Fluid pressure sensor	44	450	33
Fluid temperature sensor	22	220	16
pump cover x housing	12	120	3
Pump sub-assembly x Housing	5.6	58	50 in.*lbf
Pump motor x Housing	5.2	53	46 in.*lbf
Control valve assembly	-
AHC fluid line	15	155	11
Bracket x Control valve assembly	5.5	55	48 in.*lbf
Cushion bolt	7.8	80	69 in.*lbf
Cover x Control valve assembly	4.4	45	38 in.*lbf
Height control accumulator	-
Inlet fluid line	15	155	11
Outlet fluid line	30 (24)	310 (245)	22 (18)
Height control accumulator x Body	29	300	22
Bleeder plug	6.9	70	61 in.*lbf
Pump attenuator	-
Inlet fluid line	15	155	11
Outlet fluid line	30 (24)	310 (245)	22 (18)
Pump attenuator x Body	18	185	13
Damping force control actuator	-
Inlet fluid line	15	155	11
Outlet fluid line	44	450	33
Cover x Body	28	290	21
Bleeder plug	8.3	84	73 in.*lbf
Damping force control actuator x Body	29	300	22
Gas chamber x Damping force control actuator	90 (25)	918 (250)	66 (18)
Height control sensor	-
Height control sensor link x Front upper suspension arm	5.6	57	49 in.*lbf
Height control sensor link x Rear upper control arm	5.6	57	49 in.*lbf
Height control sensor x Body	28	285	21

(): For use with SST