Inspection Procedure

CHECK MULTI-DISPLAY SWITCH (MULTI-DISPLAY SWITCH)
1. Check for foreign matter around the switch that might prevent operation.
  OK: No foreign matter is found.
1. NG: REMOVE ANY FOREIGN MATTER FOUND
2. OK: Go to next step.
CHECK OPERATION OF MULTI-DISPLAY SWITCH
1. After replacing the multi-display switch with a normally one, check that the panel switch operates.
  OK: Panel switch operation returns to normal.
1. NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE )
2. OK: END