Cruise Control Main Switch: Inspection
- INSPECT CRUISE CONTROL MAIN SWITCH
- Remove the cruise control main switch.
- Measure the resistance according to the value(s) in the table below.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITIONTester Connection Switch Condition Specified Condition A-1 (CCS) - A-3 (ECC) Neutral 10 kΩ or higher + (ACCEL) / RES (RESUME) 216 to 264 Ω - (COAST) / SET 567 to 693 Ω CANCEL 1,386 to 1,694 Ω Main Switch on Below 1 Ω If the result is not as specified, replace the cruise control main switch