Outer Rear View Mirror: Inspection
- INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH
- Inspect outer mirror motor operation.
- Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.
Standard
OUTER REAR VIEW MIRROR MEASUREMENT CONDITIONMeasurement Condition Specified Condition Battery positive (+) → Terminal 1 (MV)
Battery negative (-) → Terminal 10 (M+)Turns upward (A) Battery positive (+) → Terminal 10 (M+)
Battery negative (-) → Terminal 1 (MV)Turns downward (B) Battery positive (+) → Terminal 9 (MH)
Battery negative (-) → Terminal 10 (M+)Turns left (C) Battery positive (+) → Terminal 10 (M+)
Battery negative (-) → Terminal 9 (MH)Turns right (D)
- Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.
- Inspect outer mirror heater operation.
- Apply battery voltage and check operation of the mirror face, as shown in the table below.
Standard
OUTER REAR VIEW MIRROR MEASUREMENT CONDITIONMeasurement Condition Specified Condition Battery positive (+) → Terminal 4 (HTR+)
Battery negative (-) → Terminal 12 (HTR-)Mirror surface temperature becomes higher
- Apply battery voltage and check operation of the mirror face, as shown in the table below.
- Inspect electrochromic outer mirror operation.
- Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.
Standard
OUTER REAR VIEW MIRROR MEASUREMENT CONDITIONMeasurement Condition Specified Condition Battery positive (+) → Terminal 7 (EC+)
Battery negative (-) → Terminal 15 (EC)Mirror surface changes to dark
- Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.
- Inspect outer mirror motor operation.
- INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH
- Inspect outer mirror motor operation.
- Remove the outer rear view mirror assembly.
- Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.
Standard
OUTER REAR VIEW MIRROR MEASUREMENT CONDITIONMeasurement Condition Specified Condition Battery positive (+) → Terminal 1 (MV)
Battery negative (-) → Terminal 10 (M+)Turns upward (A) Battery positive (+) → Terminal 10 (M+)
Battery negative (-) → Terminal 1 (MV)Turns downward (B) Battery positive (+) → Terminal 9 (MH)
Battery negative (-) → Terminal 10 (M+)Turns left (C) Battery positive (+) → Terminal 10 (M+)
Battery negative (-) → Terminal 9 (MH)Turns right (D)
- Inspect outer mirror heater operation.
- Apply battery voltage and check operation of the mirror face, as shown in the table below.
Standard
OUTER REAR VIEW MIRROR MEASUREMENT CONDITIONMeasurement Condition Specified Condition Battery positive (+) → Terminal 4 (HTR+)
Battery negative (-) → Terminal 12 (HTR-)Mirror surface temperature becomes higher
- Apply battery voltage and check operation of the mirror face, as shown in the table below.
- Inspect electrochromic outer mirror operation.
- Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.
Standard
OUTER REAR VIEW MIRROR MEASUREMENT CONDITIONMeasurement Condition Specified Condition Battery positive (+) → Terminal 7 (EC+)
Battery negative (-) → Terminal 15 (EC-)Mirror surface changes to dark
- Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.
- Inspect outer mirror motor operation.