On-Vehicle Inspection

INSPECT DEFOGGER RELAY (Marking: RR DEF)

Measure the resistance according to the value(s) in the table below.

Standard resistance

TESTER CONNECTION SPECIFIED CONDITION CHART

Tester Condition	Specified Condition
3 - 4	Below 1 Ω (when battery voltage is not applied between terminals)
3 - 5	10 kΩ or higher (when battery voltage is not applied between terminals)
3 - 5	Below 1 Ω (when battery voltage is applied to terminals 1 and 2)

If the result is not as specified, replace the relay.

Fig 1: Defogger Relay Circuit