LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> ES 350 >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Yaw Rate And Acceleration Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Yaw Rate And Acceleration Sensor: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY  (See REMOVAL )
  3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY WITH FRONT ASH RECEPTACLE  (See REMOVAL )
  4. REMOVE INSTRUMENT PANEL FINISH END PANEL LH  (See REMOVAL )
  5. REMOVE INSTRUMENT PANEL FINISH END PANEL RH  (See REMOVAL )
  6. REMOVE CONSOLE POCKET  (See REMOVAL )
  7. REMOVE CONSOLE BOX CARPET  (See REMOVAL )
  8. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY  (See REMOVAL )
  9. REMOVE REAR CONSOLE BOX ASSEMBLY  (See REMOVAL )
  10. REMOVE NO. 3 CONSOLE BOX DUCT  (See REMOVAL )
  11. REMOVE YAW RATE AND ACCELERATION SENSOR 
    1. Disconnect the yaw rate sensor connector and clamp.
    2. Remove the 2 bolts and yaw rate sensor.
      NOTE: Do not remove the sensor from the bracket.
    Fig 1: Locating Yaw Rate Sensor Connector And Bolts
    G05250504Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals