Front Axle Hub Bolt: Replacement

REMOVE FRONT WHEEL
SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY (See REMOVAL )
REMOVE FRONT DISC (See INSPECTION )
REMOVE FRONT AXLE HUB BOLT
1. Temporarily install the 2 nuts and washers to the front axle hub bolt as shown in the illustration.
2. Using SST and a brass bar or a similar tool to hold the front axle, remove the front axle hub bolt. SST 09628-10011
  
  Fig 1: Removing Nuts And Washers To Front Axle Hub Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT AXLE HUB BOLT
1. Install a washer and nut to a new front axle hub bolt as shown in the illustration.
2. Using a brass bar or a similar tool to hold the front axle, install the hub bolt by torquing the nut.
INSTALL FRONT DISC (See REASSEMBLY )
INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY (See INSTALLATION )

Fig 2: Installing Washer And Nut To Front Axle Hub Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT WHEEL
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)