Inspection Procedure

CHECK LOOSENESS OF V-RIBBED BELT
1. Check the tension of the belt by pushing it down with your finger.
  OK:
  
  The tension of the belt is enough.
NG: REPLACE V-RIBBED BELT TENSIONER ASSEMBLY

OK: Go to Next Step
CHECK V-RIBBED BELT FOR WEAR
1. Check the V-ribbed belt for wear.
  OK:
  
  The V-ribbed belt is not worn.
NG: REPLACE V-RIBBED BELT

OK: Go to Next Step
CHECK CLUTCH PULLEY FOR WEAR
1. Check the clutch pulley groove for wear or other defects.
  OK:
  
  The clutch pulley groove is not damaged.
NG: REPLACE CLUTCH PULLEY

OK: Go to Next Step
CHECK FOR NOISE WHILE CLUTCH PULLEY IS OPERATING
1. Perform a driving test and check if noise occurs when decelerating.
  OK:
  
  Noise does not occur.
NG: REPLACE CLUTCH PULLEY

OK: REPLACE GENERATOR ASSEMBLY