Light Control Rheostat: Removal

REMOVE FRONT DOOR SCUFF PLATE LH (See REMOVAL )
REMOVE FRONT DOOR OPENING TRIM COVER LH (See REMOVAL )
REMOVE SIDE INSTRUMENT PANEL LH (See REMOVAL )
REMOVE INSTRUMENT PANEL FINISH PANEL END LH (See REMOVAL )
REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY (See REMOVAL )
REMOVE NO. 1 SWITCH HOLE BASE
1. Disengage the 4 clips.
2. Disconnect each connector and remove the No. 1 switch hole base.
  
  Fig 1: Identifying No. 1 Switch Hole Base Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE LIGHT CONTROL RHEOSTAT
1. Disengage the 2 claws and remove the light control rheostat.
Fig 2: Identifying Light Control Rheostat Claws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002