LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> ES 350 >> Repair and Diagnosis >> Electrical >> Gauges >> Meter >> Steering Pad Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Pad Switch: Installation

  1. INSTALL STEERING PAD SWITCH ASSEMBLY 
    1. Engage the 4 claws.
    2. Install the steering pad switch assembly with the 2 screws.

      Torque: 2.4 N*m (25 kgf*cm, 21 in.*lbf) 

    3. Connect the connector to the spiral cable.
    Fig 1: Identifying Steering Pad Switch Screws With Claws
    G05252894Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL STEERING PAD  (See INSTALLATION )
  3. INSTALL LOWER NO. 3 STEERING WHEEL COVER  (See INSTALLATION )
  4. INSTALL LOWER NO. 2 STEERING WHEEL COVER  (See INSTALLATION )
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  6. INSPECT SRS WARNING LIGHT  (See INSTALLATION )
  7. PERFORM INITIALIZATION 
    NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal (See INITIALIZATION ).
scientia non olet · About LEMON Manuals