Fuel Pump: Disassembly

REMOVE NO. 2 FUEL SUCTION SUPPORT
1. Using a screwdriver with its tip wrapped with tape, disengage the 5 snap claws from the claw holes, and remove the No. 2 fuel suction support.
  NOTE: Do not damage the fuel suction support.
  
  Fig 1: Locating Fuel Suction Support
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FUEL PUMP CUSHION RUBBER
1. Remove the fuel pump cushion rubber from the fuel pump.
  
  Fig 2: Locating Fuel Pump Cushion Rubber
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FUEL SENDER GAUGE ASSEMBLY
1. Disconnect the fuel sender gauge connector (*1).
2. Unlock the fuel sender gauge, and slide it to remove (*2).
  
  Fig 3: Locating Fuel Sender Gauge Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FUEL SUCTION PLATE SUB-ASSEMBLY
1. Disconnect the fuel pump connector (*1).
2. Using a screwdriver with its tip wrapped with tape, disengage the 4 snap claws from the claw holes, and pull out the fuel suction plate.
  NOTE: Do not damage the fuel suction support.
  
  Fig 4: Identifying Fuel Pump Connector With Snap Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FUEL PUMP HARNESS
1. Disconnect the connector (*1).
2. Using a screwdriver, pry out the fuel pump harness (*2).
  
  Fig 5: Locating Fuel Pump Harness And Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FUEL PUMP
1. Pull out the fuel pump from the fuel filter.
  
  Fig 6: Identifying Fuel Pump
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FUEL PRESSURE REGULATOR ASSEMBLY
1. Pull out the fuel pressure regulator from the fuel filter.
  
  Fig 7: Pulling Out Fuel Pressure Regulator
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the O-ring from the fuel pressure regulator.
  
  Fig 8: Removing Fuel Pressure Regulator O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002