Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever these DTCs are not present | P0100 - P0103 (MAF sensor) P0105 - P0108 (MAP sensor) P0115 - P0118 (ECT sensor) P0120 - P02238 (TP sensor) P0125 - VSS/ECT1 sensor, non-ECT) |
|---|---|
| Engine coolant temperature | 70°C (158°F) or more |
| Engine speed | 2,000 to 5,000 rpm |
| Engine load | 30.37% or more |
| Fuel cut high engine speed | Not executing |
| Battery voltage | 8 V or more |
| Engine switch | ON |
| ETC sensor circuit fail | Not detected |
| MAF sensor circuit fail | Not detected |
| Starter | OFF |