Child Restraint Seat Tether Anchor: Installation

INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET
1. Install the 3 child restraint seat tether anchor brackets with the 3 bolts.
  Torque: 21 N*m (214 kgf*cm, 16 ft.*lbf)
Fig 1: Identifying Child Restraint Seat Tether Anchor Bracket Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade) (See INSTALLATION )
INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade) (See INSTALLATION )
INSTALL CENTER STOP LIGHT SET (w/o Rear Sunshade) (See INSTALLATION )
INSTALL REAR SEAT SHOULDER BELT HOLE COVER (See INSTALLATION )
CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH (See INSTALLATION )
CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH (See INSTALLATION )
CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH (See INSTALLATION )
INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH (See INSTALLATION )
INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH (See INSTALLATION )
INSTALL REAR SEAT SIDE AIRBAG ASSEMBLY LH (w/ Rear Seat Side Airbag) (See INSTALLATION )
INSTALL REAR SEAT SIDE AIRBAG ASSEMBLY RH (w/ Rear Seat Side Airbag)
HINT:

Use the same procedure for the RH side and LH side.
INSTALL REAR SEAT SIDE GARNISH LH (w/o Rear Seat Side Airbag) (See INSTALLATION )
INSTALL REAR SEAT SIDE GARNISH RH (w/o Rear Seat Side Airbag) (See INSTALLATION )
INSTALL REAR DOOR SCUFF PLATE LH (See INSTALLATION )
INSTALL REAR DOOR SCUFF PLATE RH (See INSTALLATION )
INSTALL REAR SEATBACK ASSEMBLY (See INSTALLATION )
INSTALL REAR CENTER SEAT HEADREST ASSEMBLY
INSTALL REAR SEAT HEADREST ASSEMBLY
INSTALL REAR SEAT CUSHION ASSEMBLY (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Rear Seat Side Airbag)
PERFORM INITIALIZATION (w/Rear Seat Side Airbag)
NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal (See INITIALIZATION ).
INSPECT SRS WARNING LIGHT (w/ Rear Seat Side Airbag)
(See DIAGNOSIS SYSTEM )