Front Seat Inner Belt Assembly: Installation

INSTALL FRONT SEAT INNER BELT ASSEMBLY
1. Install the front seat inner belt assembly with the nut.
  Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf)
  
  NOTE: Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.
  
  Fig 1: Identifying Front Seat Inner Belt Assembly With Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. for Driver seat:
  1. Connect the connectors and engage the 6 clamps.
3. for Passenger seat:
  1. Connect the connectors and engage the 2 clamps.
INSTALL FRONT SEAT ASSEMBLY (See INSTALLATION )
INSTALL FRONT SEAT REAR OUTER TRACK BRACKET COVER (See INSTALLATION )
INSTALL FRONT SEAT REAR INNER TRACK BRACKET COVER (See INSTALLATION )
INSTALL FRONT SEAT OUTER TRACK BRACKET COVER (See INSTALLATION )
INSTALL FRONT SEAT INNER TRACK BRACKET COVER (See INSTALLATION )
INSTALL FRONT SEAT HEADREST ASSEMBLY
CONNECT FRONT SEAT OUTER BELT ASSEMBLY
1. for Driver seat:
  1. Connect the front seat outer belt assembly with the bolt.
    Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf)
    
    Fig 3: Identifying Front Seat Outer Belt Assembly With Bolt (For Driver Seat)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. for Passenger seat:
  1. Connect the front seat outer belt assembly with the bolt.
    Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf)
  2. Connect the connector.
    
    Fig 4: Identifying Front Seat Outer Belt Assembly With Bolt (For Passenger Seat)
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SEAT BELT ANCHOR COVER CAP
1. Engage the 7 claws and install the seat belt anchor cover cap.
Fig 5: Identifying Seat Belt Anchor Cover Cap With Claws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
PERFORM INITIALIZATION
NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal (See INITIALIZATION ).
INSPECT FRONT SEAT ASSEMBLY (See INSTALLATION )
INSPECT SRS WARNING LIGHT
(See DIAGNOSIS SYSTEM )