LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> GS 350 AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Windshield/WINDOWGLASS >> Power Window Control System >> Power Window Regulator Motor >> On-Vehicle Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

On-Vehicle Inspection

  1. INSPECT POWER WINDOW REGULATOR MOTOR FRONT LH 
    1. Apply battery voltage to connector terminals 1 and 2
      NOTE: Do not apply battery voltage to any terminals except terminals 1 and 2
    2. Check that the motor gear rotates smoothly as follows.
      MEASUREMENT CONDITION CHART

      Measurement Condition Specified Condition
      Battery positive (+) → 1
      Battery negative (-) → 2      		 Motor gear rotates counterclockwise
      Battery positive (+) → 2
      Battery negative (-) → 1      		 Motor gear rotates clockwise
      Fig 1: Inspecting Power Window Regulator Motor Front LH
      G05300206Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the result is not as specified, replace the motor.

  2. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY FRONT RH 
    1. Apply battery voltage to connector terminals 1 and 2
      NOTE: Do not apply battery voltage to any terminals except terminals 1 and 2
    2. Check that the motor gear rotates smoothly as follows.
      MEASUREMENT CONDITION CHART

      Measurement Condition Specified Condition
      Battery positive (+) → 1
      Battery negative {-) → 2      		 Motor gear rotates clockwise
      Battery positive (+) → 2
      Battery negative (-) → 1      		 Motor gear rotates counterclockwise

      If the result is not as specified, replace the motor.

    Fig 2: Inspecting Power Window Regulator Motor Assembly Front RH
    G05300207Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSPECT POWER WINDOW REGULATOR MOTOR REAR LH 
    1. Apply battery voltage to connector terminals 1 and 2
      NOTE: Do not apply battery voltage to any terminals except terminals 1 and 2
    2. Check that the motor gear rotates smoothly as follows.
      MEASUREMENT CONDITION CHART

      Measurement Condition Specified Condition
      Battery positive (+) → 1
      Battery negative (-) → 2      		 Motor gear rotates counterclockwise
      Battery positive (+) → 2
      Battery negative (-) → 1      		 Motor gear rotates clockwise

      If the result is not as specified, replace the motor.

    Fig 3: Inspecting Power Window Regulator Motor Rear LH
    G05300208Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSPECT POWER WINDOW REGULATOR MOTOR REAR RH 
    1. Apply battery voltage to connector terminals 1 and 2
      NOTE: Do not apply battery voltage to any terminals except terminals 1 and 2
    2. Check that the motor gear rotates smoothly as follows.
      MEASUREMENT CONDITION CHART

      Measurement Condition Specified Condition
      Battery positive (+) → 1
      Battery negative (-) → 2      		 Motor gear rotates clockwise
      Battery positive (+) → 2
      Battery negative (-) → 1      		 Motor gear rotates counterclockwise

      If the result is not as specified, replace the motor.

    Fig 4: Inspecting Power Window Regulator Motor Rear RH
    G05300209Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals