Inspection Procedure
- CHECK DTC FOR EPS CONTROL SYSTEM
- Clear the DTC (see DTC CHECK / CLEAR ).
- Check the DTC (see DTC CHECK / CLEAR ).
Result
RESULT CHARTDisplay (DTC Output) Proceed To DTC (EPS control system) is not output A DTC (EPS control system) is output B (see DIAGNOSTIC TROUBLE CODE CHART ) B: REPAIR EPS CONTROL SYSTEM ACCORDING TO DTC OUTPUT
A: Go to next step
- RECONFIRM DTC
- Clear the DTC (see DTC CHECK / CLEAR ).
- Turn the engine switch on (IG).
- Check if the same DTC is recorded (see DTC CHECK / CLEAR ).
Result
RESULT CHARTDisplay (DTC Output) Proceed To DTC (C1304/27) is not output A DTC (C1304/27) is output B B: Go to step 1
A: END