Service Data
SERVICE DATA
| Starter assembly | Specified current | 90 A or less at 11.5 V | |
| Starter armature assembly | Standard depth | 3.1 mm (0.122 in.) | |
| Maximum depth | 3.8 mm (0.150 in.) | ||
| Brush length | Standard length | 9.0 mm (0.354 in.) | |
| Minimum length | 4.0 mm (0.158 in.) | ||
| Starter relay | Specified condition | 3 - 5 | 10 kΩ or higher |
| 3 - 5 | Below 1 Ω (when battery voltage is applied to terminals 1 and 2) |
||
| Starter cut relay | Specified condition | 3 - 5 | 10 kΩ or higher |
| 3 - 5 | Below 1 Ω (when battery voltage is applied to terminals 1 and 2) |
||
| Engine switch | Resistance | Pushed:7 (SS1) - 5 (GND) | Below 1 Ω |
| Pushed: 2 (SS2) - 5 (GND) | |||
| No pushed:7 (SS1) - 5 (GND) | 10 kΩ or higher | ||
| No pushed: 2 (SS2) - 5 (GND) | |||