Engine Assembly
ENGINE ASSEMBLY - TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Air cleaner case at Body | 5.0 | 51 | 44 in.*lbf | |
| No. 1 air cleaner inlet at Radiator support upper | 5.0 | 51 | 44 in.*lbf | |
| No. 2 ground wire at Body | Body side | 9.0 | 92 | 80 in.*lbf |
| Engine side | 10 | 102 | 7 | |
| Front suspension member protector lower at Front suspension crossmember sub-assembly | 8.0 | 82 | 71 in.*lbf | |
| Front suspension crossmember sub-assembly at Body (for 2WD) | for bolt A | 167 | 1703 | 123 |
| for bolt B | 204 | 2080 | 150 | |
| for bolt C | 50 | 510 | 37 | |
| for bolt D | 49 | 500 | 36 | |
| Front suspension crossmember sub-assembly at Body (for 4WD) | for nut A | 167 | 1703 | 123 |
| for bolt B | 165 | 1683 | 122 | |
| for bolt C | 50 | 510 | 37 | |
| Engine rear mounting member at Body | 26 | 265 | 19 | |
| Drive plate and ring gear sub-assembly at Engine assembly | 83 | 850 | 61 | |
| Engine coolant temperature sensor at Rear water bypass joint | 20 | 204 | 15 | |
| Oil pressure switch at Oil filer bracket | 15 | 153 | 11 | |
| Engine oil level sensor at Oil pan | 7.0 | 71 | 62 in.*lbf | |
| Ignition coil at Cylinder head cover | 10 | 102 | 7 | |
| V-bank cover bracket at Cylinder head cover | 10 | 102 | 7 | |
| Radio setting condenser at Cylinder head cover | 10 | 102 | 7 | |
| Fuel tube sub-assembly at Cylinder head cover | 10 | 102 | 7 | |
| Water hose joint at Cylinder head cover | 10 | 102 | 7 | |
| No. 2 surge tank stay at Cylinder head | 21 | 214 | 15 | |
| V-ribbed belt tensioner at Cylinder block (for 2WD and 4WD) | 43 | 438 | 32 | |
| No. 2 idler pulley at Cylinder block | 43 | 438 | 32 | |
| Injector driver at Timing chain cover | 10 | 102 | 7 | |
| Engine mounting bracket LH and RH at Cylinder block (for 2WD and 4WD) | 43 | 438 | 32 | |
| Engine mounting insulator LH and RH at Engine mounting bracket LH and RH (for 2WD and 4WD) | for bolt | 35 | 357 | 26 |
| for nut | 70 | 714 | 52 | |
| No. 1 engine hanger at Cylinder head | 33 | 336 | 24 | |
| Exhaust manifold LH and RH at Cylinder head | 21 | 214 | 15 | |
| Oil dipstick guide at Cylinder block (for 2WD and 4WD) | 10 | 102 | 7 | |
| No. 2 oil dipstick guide at Cylinder head (for 2WD and 4WD) | 21 | 214 | 15 | |
| Steering sliding yoke sub-assembly at No. 2 intermediate shaft and steering sliding yoke (for 2WD) | 35 | 357 | 26 | |
| No. 2 steering intermediate shaft assembly at Steering main shaft and steering gear's shaft (for 4WD) | 35 | 357 | 26 | |
| Engine under cover air guide bracket at Body (for 2WD) | 26 | 265 | 19 | |
| No. 4 relay block at Body | 13 | 133 | 10 | |
| ECM cover at ECM box | 5.5 | 56 | 49 | |
| Ground cable at Cylinder block | 21 | 214 | 15 | |