Engine Unit
ENGINE UNIT - TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Cylinder block stud bolt | 10 | 102 | 7 | |
| Cylinder head stud bolt | for stud bolt A, B and C | 10 | 102 | 7 |
| for stud bolt D | 4.0 | 41 | 35 | |
| No. 1 oil nozzle sub-assembly at Cylinder block | 9.0 | 92 | 80 in.*lbf | |
| Water drain cock LH and RH at Cylinder block | 30 | 306 | 22 | |
| Water drain cock plug LH and RH at Cylinder block | 13 | 133 | 10 | |
| Crankshaft bearing cap at Cylinder block | 1st for 16 point head |
61 | 622 | 45 |
| 2nd for 16 point head |
Turn 90° | Turn 90° | Turn 90° | |
| for 12 mm head | 26 | 265 | 19 | |
| Connecting rod cap at Connecting rod sub-assembly | 1st | 40 | 408 | 30 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| Crankshaft position sensor at Cylinder block | 10 | 102 | 7 | |
| No. 2 straight screw plug at Cylinder head | 80 | 816 | 59 | |
| No. 2 straight screw plug at Cylinder head | 44 | 449 | 32 | |
| Water outlet pipe sub-assembly at Cylinder block | 10 | 102 | 7 | |
| Cylinder head sub-assembly at Cylinder block (for bank 1 and 2) | 1st | 36 | 367 | 27 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| 3rd | Turn 90° | Turn 90° | Turn 90° | |
| for 14 mm head | 30 | 306 | 22 | |
| Camshaft bearing cap at Cylinder head (for bank 1 and 2) | 10 | 102 | 7 | |
| Camshaft housing sub-assembly at Cylinder head (for bank 1 and 2) | 28 | 286 | 21 | |
| No. 2 chain tensioner assembly at Cylinder head | 21 | 214 | 15 | |
| Camshaft timing gear at Camshaft | 100 | 1020 | 74 | |
| No. 3 chain tensioner at Cylinder head | 21 | 214 | 15 | |
| No. 1 chain vibration damper at Cylinder head and cylinder block | 23 | 235 | 17 | |
| Idle sprocket assembly at Cylinder block | 60 | 612 | 44 | |
| No. 1 chain tensioner assembly at Cylinder head | 10 | 102 | 7 | |
| Crankshaft pulley at Crankshaft | 250 | 2549 | 184 | |
| Oil strainer sub-assembly at Cylinder block (for 2WD and 4WD) | 10 | 102 | 7 | |
| Oil pan baffle plate at Cylinder block | 10 | 102 | 7 | |
| Oil pan sub-assembly at Cylinder block (for 2WD and 4WD) | for bolt A | 10 | 102 | 7 |
| for bolt except A | 21 | 214 | 15 | |
| Oil strainer pipe sub-assembly at Oil pan sub-assembly (for 4WD) | 10 | 102 | 7 | |
| No. 2 oil pan sub-assembly at Oil pan sub-assembly (for 2WD and 4WD) | 10 | 102 | 7 | |
| Oil pan drain plug at No. 2 oil pan sub-assembly (for 2WD and 4WD) | 40 | 408 | 30 | |
| Cylinder head cover sub-assembly at Cylinder head (for Bank 1 and 2) | for bolt A | 21 | 214 | 15 |
| for bolt except A | 10 | 102 | 7 | |
| Rear water bypass joint at Cylinder head | 10 | 102 | 7 | |
| Water inlet with thermostat sub-assembly at Water inlet | 10 | 102 | 7 | |
| Water inlet at Chain cover | 10 | 102 | 7 | |
| No. 1 oil pipe at Cylinder head cover and cylinder head (for Bank 1 and 2) | 60 | 612 | 44 | |
| No. 1 oil pipe at Cylinder head cover and cylinder head (for Bank 1 and 2) | 60 | 612 | 44 | |
| Camshaft timing oil control valve at Cylinder head cover | 10 | 102 | 7 | |
| VVT sensor at Cylinder head cover | 10 | 102 | 7 | |
| Ventilation valve sub-assembly at Cylinder head cover | 27 | 275 | 18 | |
| Spark plug at Cylinder head | 18 | 184 | 13 | |